|
|
Build Your Online Product Catalogs?
| Product Name: |
PTMEG
|
| Supply Ability: |
|
| Related proudcts |
ptmeg, |
| Specifications |
PTMEG should be stored in totally closed containers sealed with |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
PropertyPTMEG (polytetramethylene ether glyol) is a white waxy solid. It turns into tran***rent liquid when the temperature is higher than room temperature. It dissolves easily in alcohols, esters, ketones, aromatic hydrocarbons and hydrocarbon chlorides. However, it does not dissolve in water or fatty hydrocarbons. When its molecular weight increases, its solubility drops. At room temperature, PTMEG is a good absorbent of water up to its molecular weight or maximum up to 2%. Specification
Product 1000 1800 2000
Molecular weight 1000¡À50 1800¡À50 2000¡À50
Viscosity(40℃,cP) 270 1215 1225
Refraction Ratio(nD25) 1.463 1.464 1.464
Molten Point (Tm, ℃) 24 28 32
Hydroxide Number (mgKOH/g) 106.6-118.1 60.6-64.1 54.7-57.5
Water Content (wt.ppm) 200 max. 150 max. 200 max.
Chroma (APHA) 40
Acidity Value (mgKOH/g) 0.05
Peroxides (wt.ppm as H2O2) 2
Volatility (wt.ppm) 0.1
Stability (wt.ppm as BHT) 250¡À50
Flash Point (Open Cup) ¡Ý260
Metals (wt.ppm as Fe) 1 max.
Uses of ProductsPTMEG is an important raw material for the production of polyurethane (polyurethane fibers, polyurethane elastomers, synthesized leathers, paint additives, adhesives and sealants), polyesters and polyamides.Package and TransportPTMEG should be stored in totally closed containers sealed with dry nitrogen. The containers must be fitted with heating equipment outside or inside to keep their internal temperature at about 50℃. Frozen PTMEG can be heated at about 70℃ for 24 hours to melt. PTMEG should not be stored at 90℃ for a too long time. In addition, PTMEG should be stored in cool, dry and well-ventilated places, and keep away from fire sources, ***rks and naked flames.Due to PTMEG water absorbent and ease of oxidization, it should not be exposed to moisture or air. To avoid static electricity, its containers should be earthen during transportation. PTMEG becomes highly combustible at high temperature. If fire is started, one could use spray water, alcohol foam, dry chemicals products or carbon dioxide fire extinguishers to put off |
| Company: |
Nanjing Deshixin Chemical Co.,Ltd.
|
| Contact: |
Ms. annie lu |
| Address: |
A/411 Room, Donghua Metal Steel Market,380 Maiyao Road |
| Postcode: |
210028 |
| Tel: |
8602589607330 |
| Fax: |
8602589607322 |
| E-mail: |
|
|
|
|
Home
